Short answer: Canary and Tedee protect different parts of the same entry. Canary is the camera-led choice for seeing and reviewing activity. Tedee is the access-led choice for controlling who can unlock a compatible door. Neither replaces a complete alarm design by itself. The better buy depends on whether the missing evidence is visual context or controlled entry.
Research note, August 16, 2026: This comparison uses Canary’s product and service pages plus Tedee’s GO2 and PRO product pages. It does not copy a temporary price or promotion. Confirm the exact model, region, door fit, power path, app, service, storage, user, and integration terms before ordering.
Canary vs Tedee at a glance
| Decision | Canary | Tedee |
|---|---|---|
| Primary job | Camera view, event context, and supported video features | Door locking, credentials, and supported access features |
| Best starting point | You cannot see what happened near an entry or room | You cannot issue, separate, or remove door access cleanly |
| Main dependency | Camera placement, network, power, app account, and any service path used | Exact lock model, door geometry, installation, power, app account, and credential method |
| Evidence | Video and event history through the supported setup | Lock state and access activity through the supported setup |
| Response | A person must interpret the event and decide what to do | A person must manage access and react to a failed or unexpected entry |
| Not a substitute for | Door contacts, perimeter zones, or a full alarm response plan | Cameras, perimeter sensors, or a full alarm response plan |
The core difference: seeing activity versus controlling entry
A camera can show a person approaching, a package arriving, or movement in its field of view. It does not prove that a door is closed, locked, or protected by an alarm zone. A smart lock can issue and revoke access, but it cannot show why somebody is waiting outside, whether another person followed them in, or what happened beyond the door.
Choose Canary first when the largest gap is visual context. Choose Tedee first when the largest gap is credential control. If both gaps matter, design the camera and lock as two separate controls. Give each one its own owner, test, failure response, and recovery path.
Start with an entry map
List the front door, side door, patio door, garage entry, gate, and any shared-building entrance. For each route, record the camera view, door contact, lock, lighting, alarm zone, network signal, power source, and person responsible for recovery. This stops a common mistake: improving the front door while leaving a side route unobserved or controlled by a shared key.
| Route | Visual question | Access question | Failure check |
|---|---|---|---|
| Front door | Can the camera identify the approach without filming private neighboring space? | Can residents, guests, and service workers use separate credentials? | What happens if internet or lock power fails? |
| Side door | Is the face visible before the person reaches the handle? | Does this door need a code, key, app, or owner escort? | Who checks it after a failed close or jam? |
| Garage entry | Does the view protect vehicles and tools without exposing household routines? | Is the interior door controlled separately from the vehicle door? | Can the household enter safely during a power cut? |
| Patio door | Does the camera distinguish people from ordinary yard movement? | Is the existing door compatible with the intended lock type? | How is an offline or low-battery state discovered? |
Canary buying checks
Use the official Canary product page to identify the exact camera and its supported functions. Then read the Canary service page for the current boundary between device functions and service-backed features. Do not assume that a feature shown for one model, app state, or service path applies to every Canary device.
- Placement: check the field of view at the real height, distance, lighting, and backlight conditions.
- Event path: confirm what creates an event, how quickly it reaches the phone, and what record remains.
- Storage and export: verify history, retention, download, sharing, and deletion for the setup you will use.
- Household access: test the owner, another adult, and a lower-permission user. Do not share one master login.
- Privacy: define camera angles, audio rules, household notice, guest expectations, and account removal.
- Outages: document what happens when power, broadband, Wi-Fi, the app, or the service path is unavailable.
Tedee buying checks
Start at Tedee’s GO2 product page, then use Tedee PRO product page for the exact model’s installation and operating documents. A brand-level compatibility statement is not enough. Match the specific lock to the door, bore, backset, handing, trim clearance, region, platform, and credential method.
- Door fit: measure the real door and confirm that the bolt moves freely before adding electronics.
- Credentials: list key, keypad, app, platform, and any other supported access route. Give each person a named credential where possible.
- Guest lifecycle: set the narrowest permitted period, then remove access and run a real denial test.
- Power: record the battery type, warning behavior, replacement method, and the fallback if the lock cannot operate electronically.
- Alignment: test the lock with the door open and closed. A bolt that rubs can look like an account or battery problem.
- Recovery: keep an owner-controlled path that does not depend on the same phone, account, or network that failed.
Camera evidence is not door state
A video clip may show somebody at the entrance, but it can miss a door that failed to latch after the person left. Add a door contact when open and closed state matters. Name the camera, contact, and lock after the same physical entry so household members can read an alert without guessing which device it describes.
During testing, create one controlled sequence: approach, unlock, open, close, lock, and departure. Compare the camera time, lock activity, contact state, and phone notifications. Record clock drift and delivery delay. The goal is not perfect timestamp matching; it is a record the household can reconstruct under stress.
Privacy and account ownership
The camera account may expose live video and household routines. The lock account may expose the ability to enter. Treat both as high-impact accounts. Use unique credentials, supported multi-factor protection, named household users, and a written removal process. Do not leave either system tied only to a contractor, former resident, old phone, or personal email nobody else can recover.
Keep exterior views on the property you need to protect and avoid private neighboring windows or shared spaces where people reasonably expect privacy. If the camera can capture audio, decide when it is allowed and check local rules. Record who can watch live video, review history, export files, create access codes, change integrations, and reset the device.
Outage and failure matrix
| Failure | Canary check | Tedee check | Owner action |
|---|---|---|---|
| Broadband down | Check local behavior, remote view, event delivery, and later recovery | Check local credentials and any remote management boundary | Do not reset first; record state and use the tested fallback |
| Wi-Fi weak | Measure the installed camera location at busy and quiet times | Confirm the exact model’s connection path | Fix placement or network coverage before adding automations |
| Power loss | Record what stops immediately and how restart is confirmed | Separate household power loss from lock battery behavior | Use safe lighting and owner-controlled entry |
| Phone lost | Revoke the device and its sessions | Revoke the device, app session, and exposed credentials | Use a second verified owner account for recovery |
| Door misaligned | Camera may show the close but cannot prove the bolt engaged | Test bolt travel and closed-door operation | Fix the mechanical door condition before blaming software |
| Service unavailable | Check what device and app functions remain | Check local entry and account recovery | Follow the written degraded-mode plan |
Response ownership matters more than notification count
More alerts do not create a better response. Decide who checks a person event, who calls a resident, who can unlock remotely if supported, who contacts emergency services, and who preserves evidence. Set a stop rule for uncertain events. A household member should not confront an unknown person because an app notification lacked context.
If the property needs door and window zones, a siren, controlled arming, and a monitoring or dispatch path, compare a full alarm system separately. A Canary camera and Tedee lock can sit beside that system, but neither product category should be described as a complete alarm response on its own.
Compare cost at equal scope
Do not compare one camera price with one lock price and call the cheaper device the winner. Build two three-year scopes around the same entrances and users.
| Cost line | Canary scope | Tedee scope |
|---|---|---|
| Hardware | Exact cameras, mounts, power accessories, and network work | Exact locks, door preparation, trim, keys, and installation |
| Service | Any selected video or service plan for the full term | Any selected platform, remote, or partner service required by the chosen setup |
| Maintenance | Power supplies, replacement hardware, network work, and time | Batteries, keys, door alignment, replacement hardware, and time |
| People | Household onboarding, privacy review, evidence export, and offboarding | Credential setup, guest changes, lost-device response, and offboarding |
| Failure cost | Missed evidence, unusable history, or an offline camera | Lockout, failed entry, stale credentials, or a door that does not secure |
Who should choose Canary?
- Households whose main gap is visual context around an entry or room.
- People willing to test placement, event delivery, history, export, accounts, and privacy.
- Homes that already have a separate answer for door state, physical access, and alarm response.
Who should choose Tedee?
- Households whose main gap is controlled access at a compatible door.
- People who need separate resident, guest, or service credentials and a clean removal process.
- Homes willing to verify mechanical fit, battery behavior, integrations, recovery, and alignment.
Who needs both?
Use both categories when a household needs to see the approach and control the door. Keep their jobs separate: Canary supplies visual context through the supported camera setup; Tedee controls compatible door access through the supported lock setup. Add a contact sensor if open and closed state matters, and add a full alarm path if the property needs arming, siren, monitoring, or dispatch.
60-minute Canary vs Tedee acceptance test
- Confirm the exact camera, lock, door, app, account owners, and chosen service paths.
- Walk the camera approach in daylight and lower light; check framing, delay, event history, and export.
- Use each intended lock credential, then try an expired or removed guest credential.
- Open, close, and lock the door while comparing camera, lock, and contact timestamps if a contact is installed.
- Test a lower-permission household account in both systems.
- Simulate a lost phone by revoking a test session and confirming it no longer works.
- Run only safe network and power checks; record what remains, what stops, and how recovery is confirmed.
- Inspect camera privacy, audio rules, door alignment, physical fallback, and evidence ownership.
- Record every failed step, its owner, and the retest date before relying on the setup.
Verdict
Canary is the better first purchase when visual evidence is the missing control. Tedee is the better first purchase when door access is the missing control. For many front-door setups, the right answer is not one brand defeating the other. It is a camera, lock, contact sensor, and response plan with clear boundaries and tested failure paths.
FAQ
Can Canary lock or unlock a door?
Do not assume so from a general smart-home claim. Canary is camera-led. Verify any current integration against the exact Canary device, Tedee lock, platform, region, account, and supported action.
Does a Tedee smart lock replace a security camera?
No. A smart lock controls supported door access. It does not provide the same visual context, field of view, video event, history, or evidence export as a camera.
Does a camera prove the door is locked?
No. A clip may show the door moving, but it does not prove the latch or bolt engaged. Check lock state through the supported lock path and add a contact sensor when open and closed state matters.
Which is better without a subscription?
Compare the exact functions you need without a paid service on both sides. Verify current device, app, history, export, remote, user, and integration boundaries rather than assuming that “no subscription” means the same thing for cameras and locks.
What should renters verify?
Get written permission before drilling, changing exterior hardware, or altering a lock. Confirm removal, restoration, keys, camera placement, shared-space privacy, and who owns the accounts after the tenancy ends.
With over 20 years of experience evaluating home security technologies, Andrew is a trusted home security expert. He specializes in DIY home security systems, indoor and outdoor security cameras, doorbell cameras, and safety software such as password managers. Andrew uses in-depth research to provide accurate and actionable insights. His work helps you make better decisions to protect your home.
Leave a Reply