Wyze Solar Cam Pan Recall 2026: Model Check, Fire Risk, Remedy, Disposal, and Replacement Test

Source record published June 10, 2026: Wyze Labs has recalled the Wyze Solar Cam Pan security camera after the U.S. Consumer Product Safety Commission said incorrect assembly instructions can lead some owners to puncture the camera’s lithium-ion battery during installation.

This is not a normal spec-sheet problem. It is a safety issue tied to how the solar panel was attached to the camera body. If you own one, check the recall before you keep using it. If you are shopping for outdoor cameras, use this as a reminder to look past resolution, AI alerts, and monthly fees. Battery design and install instructions matter too.

Quick facts on the Wyze Solar Cam Pan recall

• Product: Wyze Solar Cam Pan security cameras.
• Model: WYZESCPWH, sold in white.
• Recall date: June 4, 2026.
• Units affected: About 321,360 in the U.S., plus about 2,560 in Canada.
• Sold through: Wyze, Home Depot, Micro Center, Amazon, Best Buy, Temu, B2B Renew, ReturnPro, and other channels from October 2025 through April 2026.
• Reported incidents: Wyze received 13 reports of overheating, including six reports where cameras exploded and caught fire, and six reports of minor burns.
• Remedy: Wyze is offering a free replacement camera with solar panel accessory, a full refund, or a gift card for the original purchase price.

The core issue is screw placement. The camera kit included short pan-head machine screws and long flat-head wood screws. The short screws were meant to attach the solar panel bracket to the top of the camera. The long screws were meant for mounting the unit to a wall or other surface. If the long screws were used on top of the camera, they could puncture the internal lithium-ion battery casing and create a fire or burn risk.

What Wyze Solar Cam Pan owners should do now

1. Stop and check the model. Look for model number WYZESCPWH on the back of the camera.
2. Check how the solar panel was installed. If the solar panel was attached to the top of the camera with the long flat-head screws, participate in the recall.
3. If you are unsure, use Wyze’s recall guide. Wyze says owners who are uncertain should use its step-by-step guidance before dismantling the camera.
4. Do not throw the device in normal trash or curbside recycling. Recalled lithium-ion battery products need local hazardous-waste handling because of fire risk.
5. Start the claim through Wyze. The official recall page is wyze.com/SCPrecall. Wyze also lists recall@wyze.com and 888-832-7226 for support.

Wyze’s own recall FAQ says the recall applies to Solar Cam Pan cameras purchased on or before April 3, 2026 where the solar panel was attached to the top of the camera using the wrong long screws. Wyze also says owners with a separately mounted solar panel, or a correctly top-mounted panel using the short pan-head machine screws, do not need action. If you are not sure which screws were used, treat that as a real check, not a guess.

What this means for outdoor security camera buyers

The recall does not mean every solar camera is unsafe. It does show why ultra-cheap battery cameras need a different buying checklist than wired cameras or full alarm systems.

1. Battery placement matters

Outdoor cameras take weather, heat, vibration, and user installation errors. A camera with an internal lithium-ion battery should have clear physical separation between mounting points, screws, and the battery casing. If the install process depends on choosing between similar screws, the instructions and hardware labeling need to be obvious.

2. Solar charging is convenient, but it adds install risk

Solar camera kits often include brackets, panels, weatherproof cables, screws, anchors, and app steps. The more pieces involved, the more room there is for a wrong install. Before buying a solar camera, check whether the manufacturer publishes corrected instructions, video guides, and recall notices in a place regular buyers can find.

3. Recalls belong in your camera research

Most buyers compare resolution, field of view, night vision, AI detection, and cloud storage. Add one more check: search the brand and model with the word “recall” before you buy. The CPSC recall database is the best primary source for U.S. consumers.

4. Cheap cameras are not the same as full home security

A low-cost outdoor camera can help you see what happened. It does not replace entry sensors, a siren, cellular backup, or professional monitoring. If your real goal is intrusion response, compare camera-only brands against full systems before you spend the budget on standalone cameras.

Buyer checklist for solar and battery security cameras

• Look up recalls: Search the exact model on CPSC Recalls.
• Read the installation guide before buying: If the manual is vague, that is a warning sign.
• Check battery handling: Avoid devices that require you to remove, puncture, pry, or modify sealed battery areas.
• Confirm the weather rating: Outdoor cameras should state the IP rating clearly.
• Check storage costs: Cheap hardware can become expensive if useful recording requires a monthly plan.
• Check security history: Past privacy incidents, weak update practices, and poor recall communication should affect the decision.
• Match the job: Use cameras for visibility. Use an alarm system for intrusion detection and emergency response.

What to compare instead

If the Wyze recall has you rethinking a camera-only setup, start with our best Wi-Fi security cameras guide and the eufy vs Wyze comparison. For local-storage camera systems, also compare Reolink vs eufy. For a camera-plus-alarm path, read Abode vs Wyze.

Bottom line: if you own the Wyze Solar Cam Pan, check the recall now. If you are buying outdoor cameras in 2026, do not stop at price and resolution. A safer pick is the one with clear instructions, sane battery design, transparent recall handling, and a security setup that matches what you actually need.

Checked August 12, 2026: The model, unit count, incident, and remedy facts above remain attributed to the June 4, 2026 CPSC and Wyze notices in the source list. Owners should use those official routes for eligibility and handling instructions rather than a marketplace listing, social post, or copied support number.

Owner recall-response checklist

Do not turn a safety recall into an improvised repair. The first job is to identify the exact model and preserve the information needed for the claim. If the camera is hot, swollen, smoking, damaged, or otherwise unsafe, keep people and pets away and follow local emergency and hazardous-battery guidance. Do not dismantle a damaged lithium-ion device to obtain better photos.

1. Confirm the label: record the model number, serial number where safely visible, purchase channel, and purchase date.
2. Open the official notice: compare the exact model and installation condition with the current CPSC and Wyze instructions.
3. Document from a safe position: save the order record and take only the photos requested by the official claim process.
4. Stop normal use when directed: follow the recall instructions for power, removal, storage, and transport. Do not guess at lithium-battery handling.
5. Choose and record the remedy: note whether the claim requests replacement, refund, or gift card, plus the case number and promised timing.
6. Use an approved disposal route: follow Wyze, CPSC, and local household-hazardous-waste directions. Never place a recalled lithium-ion camera in household trash or ordinary curbside recycling.

Keep the property covered during the replacement gap

A removed camera creates a visibility gap, not permission to mount another untested device in the same place. Record which approach, gate, driveway, or doorway lost coverage. Preserve direct door and window sensors, siren behavior, outdoor lighting, and any separate alarm response. If a temporary camera is used, verify its power source, mounting instructions, weather rating, recording path, privacy boundary, and alert owner before relying on it.

Do not represent a camera-only workaround as intrusion response. A camera can add context and evidence; direct entry sensors and an alarm path do different jobs. The Abode vs Wyze comparison explains that boundary, while the Wi-Fi camera guide helps compare replacement-camera basics.

Replacement-camera acceptance record

45-minute replacement acceptance test

1. Minutes 0–10 — paperwork and hardware: match the delivered model to the order and manual. Identify every screw, bracket, cable, seal, and approved mounting point before assembly.
2. Minutes 10–20 — safe installation review: confirm the bracket and solar-panel route follow the exact current instructions. Stop if hardware labels, screw depth, or battery clearance are uncertain.
3. Minutes 20–30 — coverage and privacy: walk the intended approach in daylight and available night conditions. Confirm the frame, activity zone, neighboring boundary, and required notification.
4. Minutes 30–40 — recording and response: trigger an expected event, locate the clip, verify timestamp and storage, export a test file, and confirm who acknowledges the alert.
5. Minutes 40–45 — failure and closeout: simulate a safe connectivity loss, restore service, verify recovery, save the result, and schedule a recall/model check with the maintenance calendar.

Fail the replacement when the exact instructions are unavailable, hardware is ambiguous, the battery or enclosure is damaged, privacy boundaries are wrong, evidence cannot be recovered, or the camera fails without a useful owner alert. Record the failure and resolve one issue at a time before mounting the device permanently.

Sources

• U.S. Consumer Product Safety Commission recall notice, June 4, 2026
• Wyze Solar Cam Pan recall information and FAQ, June 4, 2026

Andrew Becker

With over 20 years of experience evaluating home security technologies, Andrew is a trusted home security expert. He specializes in DIY home security systems, indoor and outdoor security cameras, doorbell cameras, and safety software such as password managers. Andrew uses in-depth research to provide accurate and actionable insights. His work helps you make better decisions to protect your home.